allows you to move the bar 5/8" (14mm) in any direction from center. You also have a 6 degree spherical adjustment. This feature is a huge asset for bores larger than 10" (254mm) that might require an extra degree of precision alignment.
Part Number: 414-309
Part Number: 414-310 Adjustable X/Y Mounting Head Only
Part Number: 414-330 Adjustable X/Y Tail Support Only
2" (50.8mm) Tail Support
4 bolt flange bearings on replaceable
mounting plates
Part Number: 414–202
Part Number: 414-202A Replacement Mounting Plate
Part Number: 414-202B Replacement Flange
2" (50.8mm) Boring Bars
Staggered 1/2" tool ports every three inches
along the bar. Tool ports are broached and threaded Bars are made from C1045 precision ground shafting.
Available chrome plated and polished
3’ Bar
Part Number: 414-213-36 Polished Bar
Part Number: 414-213-36C Chrome Bar
5’ Bar
Part Number: 414-213-60 Polished Bar
Part Number: 414-213-60C Chrome Bar
7’ Bar
Part Number: 414-213-84 Polished Bar
Part Number: 414-213-84C Chrome Bar
Note: for Metric place an M at the end of the part number
Custom bars and lengths available on request
2" (50.8mm) Line-Up Cones
Steel cones
Precision alignment
Relived in the back to reduce weight
2" to 4" (50.8 to 101.6mm)
Part Number: 414-203
4" to 6" (101.6 to 152.4mm)
Part Number: 414-204
6" to 8" (152.4 to 203.2mm)
Part Number: 414-215
8" to 10" (203.2 to 254mm)
Part Number: 414-214
2" Adjustable Line-Up Tool (Spider) For bores 8"- 16"
For aligning and centering the bar when
working with bores larger than 8" (203mm). The line up tool dials out to the diameter you need.
The kit comes in a custom carrying case, with
two centering tools and four sets of extensions.
Part Number: 414-501
2" Clamping Collars
To secure the line up cones in place during
setup
Split collar with allen head screw.
Part Number: 414-205
(Sold in a package of 2)
2" Calibration Wrench
The Calibration Wrench allows accurate cutting
tool adjustment in increments of .001". All of our boring bars have broached and threaded tool ports with a scribed line on center. We put an adjusting screw at the base of the cutting tool that the Calibration Wrench fits into. There are 50 graduations on the wrench; as the graduations pass the scribed line the cutting tool advances .001" with each graduation.
Part Number: 414-207 (c/w 5 cutting tool adjusters)
Part Number: 414-206 (Cutting Tool adjusters) (Sold in package of 5)
2" Accessories Tool Box
Includes:
Tool Box
Set Screws
Sample Micro 100 carbide tooling
Wrenches
Allen keys
Part Number: 414-250
2" (50.8mm) Large Bore Adapters
The York large bore adaptors clamp securely
to our 2" (50.8mm) boring bar. The large bore adapter supports the tool bit to accommodate larger bores over 6" (152mm) in diameter. The 6-10" (152-254mm) adapter can be used with the York calibration wrench. The 6-10" (152- 254mm) adapter is our standard adapter. Custom large bore adapters are also available for 10-13" (254-330mm) and 13-16" (330-406mm).
Part Number: 414-102A Replacement Plate Part Number: 414-102B Replacement Flange
1 1/4" (32mm) Boring Bars
Staggered 3/8” (10mm) tool ports every 3”
(77mm) along the bar
Tool ports are broached and threaded
Bars are made from C1045 precision ground
shafting
Available chrome plated and polished
4’ Bar
Part Number: 414-113-48 Polished Bar
Part Number: 414-113-48C Chrome Bar
6’ Bar
Part Number: 414-113-72 Polished Bar
Part Number: 414-113-72C Chrome Bar
1 1/4" (38mm) Line-Up Cones
Steel cones 1 1/4 to 3" and 3 to 5"
Precision alignment
1 1/4" to 3"
3" to 5"
1 1/4" to 3" (38 to 76mm)
Part Number: 414-103
(Set of 2)
3" to 5" (76 to 127mm)
Part Number: 414-104
(Set of 2)
1 1/4" (38mm) 3-5" (76 to 127mm) Large Bore Adaptor
This adaptor is used to support tooling for bores
greater than 3".
It will help reduce tool breakage and chatter. For maximum success we recommend using our 2" bars for bores greater than 3".
Part Number: 414-307
1 1/4" (38mm) Clamping Collars
Used to secure the line up cones in place during
setup
Split collar with allen head screw
Part Number: 414-105
(Set of 2)
1 1/4" Calibration Wrench
The Calibration Wrench allows accurate cutting
tool adjustment in increments of .001". All of our boring bars have broached and threaded tool ports with a scribed line on center. We put an adjusting screw at the base of the cutting tool that the Calibration Wrench fits into. There are 50 graduations on the wrench; as the graduations pass the scribed line the cutting tool advances .001" (.02mm) with each graduation.
Part Number: 414-107
(Comes with 5 cutting tool adjusters)
Part Number: 414-106 Tool adjusters
(Sold in a package of 5)
4-14 ET 2 1/4" Items, recommended with our Hydraulic bar drives
2 ¼” (57mm) Mounting Head (Standard)
Two bearings for added support
One Borewelder mount plate included
Alignment adjusting screws
Part Number: 414-601 Assembly
Part Number: 414-601A Replacement Inserts
X/Y Adjustable Mounting Head & Tail Support
Freedom to move - the X/Y mounting head
allows you to move the bar 5/8" (14mm) in any direction from center. You also have a 6 degree spherical adjustment. This feature is a huge asset for bores larger than 10" (254mm) that might require an extra degree of precision alignment.
Part Number: 414-609 (Kit)
Part Number: 414-610 Adjustable X/Y Mounting Head Only
Part Number: 414-330 Adjustable X/Y Tail Support Only
2 ¼” (57mm) Tail Support
4 bolt flange bearing on a replaceable mounting
plate
Part Number: 414–602
Part Number: 414-202A Replacement Plate Part Number: 414-202B Replacement Flange
2 ¼” (57mm) Bar
Staggered 1/2" (12mm) tool ports every 3”
(76mm) along the bar. Tool ports are broached and threaded Bars are made from C1045 precision ground shafting.
Available chrome plated and polished
3' (914mm) Boring Bar
Part Number: 414-613-36 Polished Bar
Part Number: 414-613-36C Chrome Bar
5' (1524mm) Bar
Part Number: 414-613-60 Polished Bar
Part Number: 414-613-60C Chrome Bar
8' (2438mm) Bar
Part Number: 414-613-96 Polished Bar
Part Number: 414-613-96C Chrome Bar
Note: for Metric place an M at the end of the part number
Custom bars and lengths available on request
2 ¼” (57mm) Line-Up Cones
Steel cones
Precision alignment
Relived in the back to reduce weight
2 -1/4" to 4" (50.8 to 101.6mm)
Part Number: 414-603
(Set of 2)
4" to 6" (101.6 to 152.4mm)
Part Number: 414-604
(Set of 2)
6" to 8" (152.4 to 203.2mm)
Part Number: 414-615
(Set of 2)
2 ¼” (57mm) Adjustable Line-Up Tool For bores 8" to 24"
For aligning and centering the bar when
working with bores larger than 8" (203mm). The line up tool dials out to the diameter you need.
The kit comes in a custom carrying case, with
two centering tools and four sets of extensions.
Part Number: 414-600
2 ¼” (57mm) Clamping Collars
Used to secure the line up cones in place during
setup
Split collar with allen head screw
Part Number: 414-605
Calibration Wrench Same as in the 2” (50.8mm)kits
The Calibration Wrench allows accurate cutting
tool adjustment in increments of .001". All of our boring bars have broached and threaded tool ports with a scribed line on center. We put an adjusting screw at the base of the cutting tool that the Calibration Wrench fits into. There are 50 graduations on the wrench; as the graduations pass the scribed line the cutting tool advances .001" (.02mm) with each graduation.
surfaces 90 degrees to the bore. The facing tool attaches to our 2" (50.8mm) boring bar. Two tool ports are set in the facing tool; one at 45 degrees and the other at 90 degrees. Each revolution of the bar actuates a gear driven lead screw that advances the cutting tool .005" (.127mm).
Part Number: FT-1000
Part Number: FT 9000 Max 18” (457mm)
Off-Set Drive (A unique feature no one else has)
Our offset drive feature allows more flexibility
than through the bar designs. The York line-boring machine is an excellent choice for working in constricted areas, as the driveline allows 30 degrees offset in any direction from the boring bar alignment.
Our thru-bar measuring tool allows you to accurately
measure the bore without removing the bar. The measuring tool is placed into an adjacent tool port and traversed into the bore. By loosening the setscrew, the spring loaded measuring tool snaps opens - capturing the size of the bore. Tighten the setscrew and traverse the tool from the bore. Pull the measuring tool out of the bar. Using a micrometer, measure the thru-bar tool for the diameter of the bore.
