Subscribe to our Newsletter:

 

4-14 ET 2" (50.8mm) Items

The York 4-14 ET (electric touch) portable line-boring machine is our finest yet. Proven dependable and extremely powerful. Shown below with the Fein 4 speed reversible bar drive motor, this combination makes the 4-14 ET extremely portable. A unique feature is the variable speed feed system with rapid traverse. This feed system provides 14 inches of cutting tool travel. Our control panel adds ease to the operation. Reduce your heavy equipment down time with the York 4-14 ET portable line-boring machine.

2" Mounting Head (Standard)     Two bearings for added support One Borewelder mount plate included Alignment adjusting screws     Part Number: 414-201   Part Number: 414-201A Replacement Inserts

Adjustable Mounting Head     Freedom to move - the X/Y mounting head   allows you to move the bar 5/8" (14mm) in any direction from left. You also have a 6 degree spherical adjustment. This feature is a huge asset for bores larger than 10" (254mm) that might require an extra degree of precision alignment.     Part Number: 414-309   Part Number: 414-310 Adjustable X/Y Mounting Head Only Part Number: 414-330 Adjustable X/Y Tail Support Only

2" (50.8mm) Tail Support     4 bolt flange bearings on replaceable   mounting plates     Part Number: 414–202   Part Number: 414-202A Replacement Mounting Plate Part Number: 414-202B Replacement Flange

2" (50.8mm) Boring Bars     Staggered 1/2" tool ports every three inches   along the bar. Tool ports are broached and threaded Bars are made from C1045 precision ground shafting. Available chrome plated and polished     3’ Bar   Part Number: 414-213-36 Polished Bar   Part Number: 414-213-36C Chrome Bar     5’ Bar   Part Number: 414-213-60 Polished Bar   Part Number: 414-213-60C Chrome Bar     7’ Bar   Part Number: 414-213-84 Polished Bar   Part Number: 414-213-84C Chrome Bar     Note: for Metric place an M at the end of the part number Custom bars and lengths available on request

2" (50.8mm) Line-Up Cones     Steel cones Precision alignment Relived in the back to reduce weight     2" to 4" (50.8 to 101.6mm)   Part Number: 414-203   4" to 6" (101.6 to 152.4mm)   Part Number: 414-204   6" to 8" (152.4 to 203.2mm)   Part Number: 414-215   8" to 10" (203.2 to 254mm)   Part Number: 414-214

2" Adjustable Line-Up Tool (Spider) For bores 8"- 16"     For aligning and lefting the bar when   working with bores larger than 8" (203mm). The line up tool dials out to the diameter you need. The kit comes in a custom carrying case, with   two lefting tools and four sets of extensions.   Part Number: 414-501

2" Clamping Collars     To secure the line up cones in place during   setup Split collar with allen head screw.     Part Number: 414-205 (Sold in a package of 2)

2" Calibration Wrench     The Calibration Wrench allows accurate cutting   tool adjustment in increments of .001". All of our boring bars have broached and threaded tool ports with a scribed line on left. We put an adjusting screw at the base of the cutting tool that the Calibration Wrench fits into. There are 50 graduations on the wrench; as the graduations pass the scribed line the cutting tool advances .001" with each graduation.     Part Number: 414-207 (c/w 5 cutting tool adjusters)   Part Number: 414-206 (Cutting Tool adjusters) (Sold in package of 5)

2" Accessories Tool Box     Includes: Tool Box Set Screws Sample Micro 100 carbide tooling Wrenches Allen keys     Part Number: 414-250

2" (50.8mm) Large Bore Adapters     The York large bore adaptors clamp securely   to our 2" (50.8mm) boring bar. The large bore adapter supports the tool bit to accommodate larger bores over 6" (152mm) in diameter. The 6-10" (152-254mm) adapter can be used with the York calibration wrench. The 6-10" (152- 254mm) adapter is our standard adapter. Custom large bore adapters are also available for 10-13" (254-330mm) and 13-16" (330-406mm).     6" to 10" (152.4 to 254mm)   Part Number: 414-303   10" to 13" (254 to 330.3mm)   Part Number: 414-301   13" to 16" (330.2 to 406mm)   Part Number: 414-302

[Back to Top]

	4-14 ET 1 1/4" (32mm) Items

1 1/4" (32mm) Mounting Head     Two bearings for added support One Borewelder mount plate included Alignment adjusting screws     Part Number: 414 101     Part Number: 414-101A Replacement Inserts

1 1/4" (32mm) Tail Support     4 bolt flange bearing on a replaceable mounting   plate     Part Number: 414 -102     Part Number: 414-102A Replacement Plate Part Number: 414-102B Replacement Flange

1 1/4" (32mm) Boring Bars     Staggered 3/8" (10mm) tool ports every 3"   (77mm) along the bar Tool ports are broached and threaded Bars are made from C1045 precision ground   shafting Available chrome plated and polished     4’ Bar   Part Number: 414-113-48 Polished Bar   Part Number: 414-113-48C Chrome Bar     6’ Bar   Part Number: 414-113-72 Polished Bar   Part Number: 414-113-72C Chrome Bar

1 1/4" (38mm) Line-Up Cones     Steel cones 1 1/4 to 3" and 3 to 5" Precision alignment 1 1/4" to 3" 3" to 5"     1 1/4" to 3" (38 to 76mm)   Part Number: 414-103 (Set of 2)   3" to 5" (76 to 127mm)   Part Number: 414-104 (Set of 2)

1 1/4" (38mm) 3-5" (76 to 127mm) Large Bore Adaptor   This adaptor is used to support tooling for bores greater than 3". It will help reduce tool breakage and chatter. For maximum success we recommend using our 2" bars for bores greater than 3".   Part Number: 414-307

1 1/4" (38mm) Clamping Collars     Used to secure the line up cones in place during   setup Split collar with allen head screw     Part Number: 414-105 (Set of 2)

1 1/4" Calibration Wrench     The Calibration Wrench allows accurate cutting   tool adjustment in increments of .001". All of our boring bars have broached and threaded tool ports with a scribed line on left. We put an adjusting screw at the base of the cutting tool that the Calibration Wrench fits into. There are 50 graduations on the wrench; as the graduations pass the scribed line the cutting tool advances .001" (.02mm) with each graduation.     Part Number: 414-107 (Comes with 5 cutting tool adjusters)   Part Number: 414-106 Tool adjusters (Sold in a package of 5)

1 1/4" (38mm) Accessories Tool Box     Includes: Tool Box Set Screws Sample Micro 100 carbide tooling Wrenches Allen keys     Part Number: 414-150

  [Back to Top]   4-14 ET 2 1/4" Items, recommended with our Hydraulic bar drives  

2 ¼" (57mm) Mounting Head (Standard)     Two bearings for added support One Borewelder mount plate included Alignment adjusting screws     Part Number: 414-601 Assembly     Part Number: 414-601A Replacement Inserts

X/Y Adjustable Mounting Head & Tail Support     Freedom to move - the X/Y mounting head   allows you to move the bar 5/8" (14mm) in any direction from left. You also have a 6 degree spherical adjustment. This feature is a huge asset for bores larger than 10" (254mm) that might require an extra degree of precision alignment.     Part Number: 414-609 (Kit)   Part Number: 414-610 Adjustable X/Y Mounting Head Only Part Number: 414-330 Adjustable X/Y Tail Support Only

2 ¼" (57mm) Tail Support     4 bolt flange bearing on a replaceable mounting   plate     Part Number: 414-602     Part Number: 414-202A Replacement Plate Part Number: 414-202B Replacement Flange

2 ¼" (57mm) Bar     Staggered 1/2" (12mm) tool ports every 3"   (76mm) along the bar. Tool ports are broached and threaded Bars are made from C1045 precision ground shafting. Available chrome plated and polished     3' (914mm) Boring Bar   Part Number: 414-613-36 Polished Bar   Part Number: 414-613-36C Chrome Bar     5' (1524mm) Bar   Part Number: 414-613-60 Polished Bar   Part Number: 414-613-60C Chrome Bar     8' (2438mm) Bar   Part Number: 414-613-96 Polished Bar   Part Number: 414-613-96C Chrome Bar     Note: for Metric place an M at the end of the part number Custom bars and lengths available on request

2 ¼" (57mm) Line-Up Cones     Steel cones Precision alignment Relived in the back to reduce weight     2 -1/4" to 4" (50.8 to 101.6mm)   Part Number: 414-603 (Set of 2)   4" to 6" (101.6 to 152.4mm)   Part Number: 414-604 (Set of 2)     6" to 8" (152.4 to 203.2mm)   Part Number: 414-615 (Set of 2)

2 ¼" (57mm) Adjustable Line-Up Tool For bores 8" to 24"     For aligning and lefting the bar when   working with bores larger than 8" (203mm). The line up tool dials out to the diameter you need. The kit comes in a custom carrying case, with   two lefting tools and four sets of extensions.   Part Number: 414-600

2 ¼" (57mm) Clamping Collars     Used to secure the line up cones in place during   setup Split collar with allen head screw     Part Number: 414-605

Calibration Wrench Same as in the 2" (50.8mm)kits     The Calibration Wrench allows accurate cutting   tool adjustment in increments of .001". All of our boring bars have broached and threaded tool ports with a scribed line on left. We put an adjusting screw at the base of the cutting tool that the Calibration Wrench fits into. There are 50 graduations on the wrench; as the graduations pass the scribed line the cutting tool advances .001" (.02mm) with each graduation.     Part Number: 414-207   Part Number: 414-206 (Tool adjusters)

Accessories Tool Box     Includes: Tool Box Set Screws Sample Micro 100 carbide tooling Allen keys Key Stock Wrenches     Part Number: 414-250

  [Back to Top]

Additional Options

Facing Tool 2-10" (50.8-254mm) Diameters     The York facing tool is designed to machine   surfaces 90 degrees to the bore. The facing tool attaches to our 2" (50.8mm) boring bar. Two tool ports are set in the facing tool; one at 45 degrees and the other at 90 degrees. Each revolution of the bar actuates a gear driven lead screw that advances the cutting tool .005" (.127mm).     Part Number: FT-1000   Part Number: FT 9000 Max 18" (457mm)

Off-Set Drive (A unique feature no one else has)     Our offset drive feature allows more flexibility   than through the bar designs. The York line-boring machine is an excellent choice for working in constricted areas, as the driveline allows 30 degrees offset in any direction from the boring bar alignment.   Part Number: OFF-000

Thru Bar Measuring Kits 1.8 - 12" 1.8 - 12" (45.7 - 304mm) or 1.8 - 16" (45.7—406mm) Diameters Our thru-bar measuring tool allows you to accurately   measure the bore without removing the bar. The measuring tool is placed into an adjacent tool port and traversed into the bore. By loosening the setscrew, the spring loaded measuring tool snaps opens - capturing the size of the bore. Tighten the setscrew and traverse the tool from the bore. Pull the measuring tool out of the bar. Using a micrometer, measure the thru-bar tool for the diameter of the bore.     1.8" to 12" (45.7 to 304mm)   Part Number: MT-000   1 1.8" to 16" (45.7 to 406mm)   Part Number: MT-200

Snap Ring Tool     3.8 to 7" (96.5 to 177.8mm) 5/8" stroke (17mm) Hydraulic feed Accurate adjustment   Part Number: SR- 000

Ripper Shank Repair Kit     A unique option that saves having to pull the   tracks to repair worn bores on D-9 to D-10 Cat (*Call us for kits to repair other models)   Part Number: RIP-000

Carbide Insert Tool Package 1/2" (12mm)     The York insert tool places the carbide-cutting   surface into the left of the bore - substantially improving cutting tool performance while extending tool holder life. Our tool holders use standard inserts that are readily available from most cutting tool suppliers. Insert tooling takes the guesswork out of tool geometry and improves the overall performance of your line-boring machine.     Part Number: ITK-000

4-14 ET Full Function Remote Control     Part Number: 414-098     *Note: 12 & 15 FT Cables available at additional cost

Micro 100 Brazed Carbide Cutting Tools     Micro 100 is highly shock resistant, will not   chip or break under normal machining conditions and is unexcelled in interrupted cutting. Micro 100 carbide is a space age carbide with superior rupture strength for exceptional machining versatility.     #6 - 3/8"   Part Number: AR-6 or AL-6 MICRO 100 "A" Style   Part Number: BR-6 or BL-6 MICRO 100 "B" Style   #8 - 1/2"   Part Number: AR-8 or AL-8 MICRO 100 "A" Style   Part Number: BR-8 or BL-8 MICRO 100 "B" Style

Boreweld Interface Plates

Cadet Bar Drive & Feed Carriage

York Cadet Feed, Drive and Carriage 12" (264mm) cutting tool travel Feed Speeds of .3 to 10" per/min (8-250mm/min) Feed Torque 140" lbs (15.8Nm) Rapid Traverse: 15" per/min (381mm/min) Weight: 80lbs (36kg) Varible 2 speed drive 30/75-95/230 RPM Note: General use machine-can not be substituted or upgraded, works with all bar packages and options. Part Number: CAD-000

All Products are shipped EXW Vancouver, BC

[Back to Top]