4-14 ET Line-boring Machine
The York 4-14 ET (electric touch) portable line-boring machine is our finest yet. Proven dependable and extremely powerful. Shown below with the Fein 4 speed reversible bar drive motor, this combination makes the 4-14 ET extremely portable. A unique feature is the variable speed feed system with rapid traverse. This feed system provides 14 inches of cutting tool travel. Our control panel adds ease to the operation. Reduce your heavy equipment down time with the York 4-14 ET portable line-boring machine. |
 |
|
 |
Variable feed speeds, 14" tool travel with rapid traverse, automatic feed with optional remote control. |
|
Available in 110v 60hz and/or 240v 50hz. |
|
Line bore vertically or horizontally. |
|
Line boring from 1 1/2 – 16” with our electric drives or up to 24” with our hydraulic bar drive |
|
Calibration wrench supplied to accurately adjust the cutting tool. |
|
Portable - powerful - easy to use. |
|
Factory trained dealer representatives provide demo's and training for line boring & bore welding. |
|
Universal mount for line boring and bore welding – allowing you to set up ahead while you work. |
|
Patents 4,932,814 and 5,000,627 Other patents pending |
|
|
|
| |
Easy as 1, 2, 3
Pick a Feed System
Choose a Bar Drive
Choose a Bar Package |
|
| 1. Feed Systems |
| |
4-14 ET Full Function Feed Carriage
14" (358mm) cutting tool travel
Feed Speeds of 0-2.5 inches per minute (64mm/min)
Feed Torque 200 inch lbs (22.6Nm)
Rapid Travers: 27 inches per min (690mm/min)
Weight: 55 lbs (25kg)
Adjustable limit stops
Comes with custom carrying case
110/240v 50/60hz
Part Number: 414-900
|
 |
|
|
4-14 Manual Feed
14" (358mm) Cutting tool travel
Manual feed by using hand wheel or ratchet
Weight: 43 lbs (19.5kg)
Comes with custom aluminum carrying case
Upgradeable to a full function machine
Part Number: 414-901
|
 |
|
|
|
| 2. Choose from 2 Electric bar drives or for extra torque our Hydraulic bar drive |
| |
Fein 4 Speed Electric Bar Drive
110v—9.6 amps
1.2 hp 35 ft lbs torque (47.5Nm)
110 or 240 v 50/60 HZ
4 bar speeds, 100/150/260/420 RPM
Reversible drive
Weighs 22 lbs (10kg)
Part Number: 414-001-110V60Hz
Part Number: 414-001-230V50Hz
Part Number: 414-001-230V60Hz
|
 |
|
|
Eibenstock, Variable 2 Speed Bar Drive
110 or 240v 50/60 HZ
Power input 1800w
Two speed variable 30-75 & 95-230 RPM
Reversible Drive
15 lbs (6.5 kg)
Modified to fit 4-14 ET carriage
Part Number: 414-095-110V
Part Number: 414-095-230V50Hz |
 |
|
|
Hydraulic Bar Drive and Power Supply Three Phase
220-480v single or three phase 50/60hz
5hp, 168ft lbs torque (227 Nm)
Reversible hydrostatic drive
Variable bar drive 40-140 or 60-180
On/Off bypass valve on bar drive motor
9 (40.3Lt) gallon fluid tank
drive weight 26 lbs (12kg)
Power supply weight 275 lbs (170kg)
Available Units:
190 Volt, 50 Hz Part# HPU-05-319050
220~240 Volt, 50Hz Part# HPU-05-322050
380 Volt, 50 Hz Part# HPU-05-338050
440~460 Volt, 50 Hz Part# HPU-05-344050
230 Volt, 60 Hz Part# HPU-05-323060
440~460 Volt, 60 Hz Part# HPU-05-346060
575 Volt, 60 Hz Part# HPU-05-357560
Hydraulic Bar Drive and Power Supply
Single Phase
220~240 Volt, 60Hz Part# HPU-05-123060
220~240 Volt, 50Hz Part# HPU-05-123050
|
 |
|
|
|
| 3. Choose from our suggested Bar Packages |
| |
A) Premium Plus Package: 1.5 to 16”(38 to 406mm)
Compete 5 bar package that covers the entire operating range of the 4-14. This is a very dynamic package designed for those who work on a wide range of large and small bores.
|
| |
B) Premium Package: 1.5 to 10" (38 to 254mm)
Complete 5 bar package that is designed for those in the heavy equipment industry that work on bores up to 10 inches, this kit can easily upgraded at any time to 16" (406mm) diameters. |
| |
C) Standard Package: 2.5 to 6” (63.5 to 152mm)
3 bar package using our 2” (52mm) boring bars. Small bars can be added at any time if required. |
| |
D) Combo Package: 1.5 to 6" (38 to 152mm)
Kit is designed to meet the needs of most equipment owners. This kit is upgradeable by adding components as needed. |
| |
E) Small Bore Package: 1.5 to 3" (38 to 76mm)
2 bar package is designed for our 1 1/4” (32mm) bars for small diameters, we have an upgrade kit that can be added to reach 5” (127mm) using our 1 1/4”(32mm) bars. |
| |
Custom packaging is also available. All our bars can be supplied with either imperial or metric tool ports. Optional chrome plating is also available.
* Place an "M" behind part number for Metric tool ports. |
|
| A |
B |
C |
D |
E |
Package Includes |
| 1 1/4" Bar Package |
| 1 |
1 |
|
|
1 |
4 Foot Bar |
| 1 |
1 |
|
1 |
1 |
6 Foot Bar |
| 2 |
2 |
|
2 |
2 |
3" Line-up Cones |
| 2 |
2 |
|
1 |
2 |
Mounting Head |
| 2 |
2 |
|
1 |
2 |
Boreweld Interface |
| 2 |
2 |
|
2 |
2 |
Tail Support |
| 2 |
2 |
|
2 |
2 |
Clamping Collars |
| 1 |
1 |
|
1 |
1 |
Calibration Tool |
| 1 |
1 |
|
1 |
1 |
Accessories Tool Box |
| 2" Bar Package |
| 1 |
1 |
1 |
|
|
3 Foot Bar |
| 1 |
1 |
1 |
1 |
|
5 Foot Bar |
| 1 |
1 |
1 |
|
|
7 Foot Bar |
| 2 |
2 |
2 |
2 |
|
2-4 " Line-up Cones |
| 2 |
2 |
2 |
2 |
|
4-6" Line-up Cones |
| 2 |
2 |
|
|
|
6-8" Line-up Cones |
| |
2 |
|
|
|
8-10" Line-up Cones |
| 1 |
|
|
|
|
8-16" Line-up Spiders |
| 2 |
2 |
2 |
1 |
|
Mounting Head |
| 2 |
2 |
2 |
1 |
|
Borewelder Interface |
| 1 |
|
|
|
|
Adjustable X/Y Mounting Kit |
| 2 |
2 |
2 |
2 |
|
Tail Support |
| 2 |
2 |
2 |
2 |
|
Clamping Collars |
| 1 |
1 |
1 |
1 |
|
Calibration Tool |
| 1 |
1 |
|
|
|
6-10" Big Bore Adaptor |
| 1 |
|
|
|
|
10-13" Big Bore Adaptor |
| 1 |
|
|
|
|
13-16" Big Bore Adaptor |
| 1 |
1 |
1 |
1 |
|
Accessories Tool Box |
| 2 ¼" (58mm) Bars now available using our Hydraulic drives - bore up to 24"(609mm) |
|
|
| [Back to Top] |
| |
|
All Products are shipped EXW Vancouver, BC
|
|
|
