Cadet Options

• 12" (264mm) cutting tool travel
• Feed Speeds of .3 to 10" per/min (8-250mm/min)
• Feed Torque 140" lbs (15.8Nm)
• Rapid Traverse: 15" per/min (381mm/min)
  
• Weight: 80lbs (36kg)
  
• Eibenstock variable 2 speed bar rotation drive 30/75-95/230 RPM
  
• Comes in an aluminum storage chest

• Two bearings for added support
• One bore welder mounting plate included
• Alignment adjusting screws

• 4 bolt flange bearings on replaceable
  mounting plates

• Freedom to move - the X/Y mounting
  head allows you to move the bar
  5/8" (14mm) in any direction from center.
  You also have a 6 degree spherical adjustment.
  This feature is a huge asset for
  bores larger than 10" (254mm) that
  might require an extra degree of precision
  alignment.

• Staggered 1/2” tool ports every three
  inches along the bar.
• Tool ports are broached and threaded
• Bars are made from C1045 precision ground shafting
• Available chrome plated and polished

• Steel cones
• Precision alignment
• Relieved in the back to reduce weight

• For aligning and centering the bar when
  working with bores larger than
  8” (203mm). The line up tool dials out to
  the diameter that you need.
• The kit comes in a custom carrying case,
  with two centering tools and four sets of
  extensions

• To secure the line up cones in place during
  set up
• Split collar with allen head screws

• The calibration wrench allows accurate cutting tool adjustment in increments of .001”. All of our boring bars have broached and threaded tool ports with a scribed line on center. We put an adjusting screw at the base of the cutting tool that the calibration wrench fits into. There are 50 graduations on the wrench. With each graduation past the scribed line the cutting tool advances .001”

• Tool box (26”)
• Set screws
• Sample Micro
• Wrenches
• Allen keys

• The York large bore adapters clamp securely to our 2” (50.8mm) boring bar. The large bore adapter supports the tool bit to accommodate larger bores over 6” (152mm) in diameter. The 6-10” (152-254mm) adapter can be used with the York calibration wrench and is our standard adapter. Custom large bore adapters are also available for 10- 13” (254-330mm) and 13-16” (330-406mm)

• Two bearings for added support
• One bore welder mount plate included
• Alignment adjusting screws

• 4 bolt flange bearing on a replaceable
  mounting plate

• Steel cones 1 1/4 to 3” and 3 to 5”
• Precision alignment
• 1 1/4” to 3”
• 3” to 5”

• Staggered 3/8” (10mm) tool ports every
  3” (77mm) along the bar
• Tool ports are broached and threaded
• Bars are made from C1045 precision
  ground shafting
• Available chrome plated and polished

• This adaptor is used to support tooling for
  bores greater than 3”. It will help reduce
  tool breakage and chatter. For maximum
  success we recommend using our 2” bars
  for bores greater than3”

• Used to secure the line up cones in place
  during set up
• Spit collar with allen head screw

• The calibration wrench allows accurate
  cutting tool adjustment in increments
  of .001”. All of our boring bars have
  broached and threaded tool ports with a
  scribed line on center. We put an adjusting screw at the base of the cutting tool that the calibration wrench fits into. There are 50 graduations on the wrench. With each graduation past the scribed line the cutting tool advances .001”.

Part Number: 414-107
(c/w 5 cutting tool adjusters)

• Tool box (21”)
• Set screws
• Sample Micro 100 carbide tooling
• Wrenches
• Allen keys

• The York facing tools are designed to
  machine surfaces 90 degrees to the bore.
  The facing tool attaches to our 2" (50.8mm) boring bar. Two tool ports are set in the facing tool; one at 45 degrees and the other at 90 degrees. Each revolution of the bar actuates a gear driven lead screw that advances the cutting tool .005" (.127mm).

• Our offset drive feature allows more
  flexibility than through the bar designs.
  The York line-boring machine is an
  excellent choice for working in constricted
  areas, as the driveline allows 30 degrees
  offset in any direction from the boring bar
  alignment.

• The York insert tool places the carbide
  cutting surface into the center of the bore
  - substantially improving cutting tool
  performance while extending tool holder
  life. Our tool holders use standard inserts
  that are readily available from most cutting tool suppliers. Insert tooling takes
  the guesswork out of tool geometry and
  improves the overall performance of
  your line-boring machine.

• Our thru-bar measuring tool allows you to
  accurately measure the bore without
  removing the bar. The measuring tool is
  placed into an adjacent tool port and
  traversed into the bore. By loosening the
  setscrew, the spring loaded measuring
  tool snaps opens - capturing the size of
  the bore. Tighten the setscrew and
  traverse the tool from the bore. Pull the
  measuring tool out of the bar. Using a
  micrometer, measure the thru-bar tool for
  the diameter of the bore.

• 3.8 to 7" (96.5 to 177.8mm)
• 5/8" stroke (17mm)
• Hydraulic feed
• Accurate adjustment

• A unique option that saves having to pull
  the tracks to repair worn bores on D-9 to
  D-10 Cat

• Micro 100 is highly shock resistant, will not
  chip or break under normal machining
  conditions and is unexcelled in interrupted
  cutting. Micro 100 carbide is a space age
  carbide with superior rupture strength for
  exceptional machining versatility.